EXTENSION: MAY, 2021 -- CORDEX: Regional climate projections

Introduction

Global Climate Models (GCM) can provide reliable climate information on global, continental and large regional scales covering what could be a vastly differing landscape (from very mountainous to flat coastal plains for example) with greatly varying potential for floods, droughts or other extreme events. Horizontal resolution limits the possibility to address smaller scale ranging from regional to local. Regional Climate Models (RCM) applied with higher spatial resolution over a limited area and driven by GCMs can provide more appropriate information on such smaller scales supporting more detailed impact and adaptation assessment and planning. Therefore Regional Climate Models (RCMs) have an important role to play by providing projections with much greater detail and more accurate representation of localized extreme events.

Regional climate projections are results from regional climate model simulations which have been generated by multiple independent climate research centres in the framework of the Coordinated Regional Climate Downscaling (CORDEX) supported by the World Climate Research Program (WCRP) and assessed by the Intergovernmental Panel on Climate Change (IPCC). These regional climate projections underpin the conclusion of the IPCC 5th Assessment Report (published in 2003) that “Continued emission of greenhouse gases will cause further warming and long-lasting changes in all components of the climate system, increasing the likelihood of severe, pervasive and irreversible impacts for people and ecosystems”.

The regional climate projections in the Climate Data Store (CDS) are a quality-controlled subset of the wider CORDEX dataset. The CORDEX vision is to advance and coordinate the science and application of regional climate downscaling through global partnerships. It aims to evaluate regional climate model performance through a set of experiments aiming at producing regional climate projections. The goals of CORDEX are:

1. To better understand relevant regional/local climate phenomena, their variability and changes, through downscaling,
2. To evaluate and improve regional climate downscaling models and techniques,
3. To produce coordinated sets of regional downscaled projections worldwide,
4. To foster communication and knowledge exchange with users of regional climate information.

A set of 26 core variables (17 for non-European domains, corresponding to surface fields, see the table below) from the CORDEX archive were identified for the CDS. These are the most used variables of the CORDEX datasets. These variables are provided from 5 CORDEX experiment types (evaluation, historical and 3 RCP scenarios) that are derived (downscaled) from the CMIP5 experiments. The temporal resolution is 3-hourly, 6-hourly, daily, monthly or seasonal information. Please note that for the non-European domains only daily datasets are available.

The CDS subset of CORDEX data have been through a metadata quality control procedure which ensures a high standard of reliability of the data. It may be for example that similar data can be found in the main CORDEX archive at the ESGF (Earth System Grid Federation) however these data come with no quality assurance and may have metadata errors or omissions. The quality-control process means that the CDS subset of CORDEX data is further reduced to exclude data that have metadata errors or inconsistencies. It is important to note that passing of the quality control should not be confused with validity: for example, it will be possible for a file to have fully compliant metadata but contain gross errors in the data that have not been noted. In other words, it means that the quality control is purely technical and does not contain any scientific evaluation (for instance consistency check).

Additional efforts (and funding) were devoted to support CORDEX activities by 1) providing support to archive in the ESGF relevant simulations available from the modelling centres for non-European domains not otherwise published in the ESGF nodes, and 2) making new simulations for the EURO-CORDEX domains. These activities are contributing to a significant enhancement of the regional climate model matrix over different domains in terms of emission scenarios, global model forcing and regional climate models. 

The effort done by Copernicus to consolidate a World-wide CORDEX dataset is also contributing to the IPCC-AR6 WGI activities, providing a curated dataset to be assessed together with global climate information from CMIP experiments, in particular in the Interactive Atlas, a new product of the IPCC allowing exploration of observed and projected climate data to complement the assessment of relevant datasets undertaken in the WGI chapters of IPCC.

In addition, CORDEX data for CDS includes Persistent IDentifiers (PID) in their metadata which allows CDS users to report any error during the scientific analysis. The error will be at least documented on the ESGF Errata Service (http://errata.es-doc.org), but also planned to be documented in the CDS. The CDS aims to publish only the latest versions of the datasets.

Domains

We are aiming at publishing various CORDEX domains for the entire World. The CDS-CORDEX subset at the moment consists of the Europe (EURO), Mediterranean (MED), North America (NAM), Arctic (ARC), Africa (AFR) and South America (SAM) CORDEX domains. More details of the entire list of CORDEX domains can be found at https://cordex.org/domains/; additionally more details for the EURO-CORDEX and NA-CORDEX activities are available at https://www.euro-cordex.net/ and https://na-cordex.org/, respectively.

Please note that the domains are not on regular grids. Projections may differ depending on the domain and the Regional Climate Model (RCM). The coordinates below are the approximate maximum and minimum values of the domain window (see more details at https://cordex.org/domains/. As a summary, the available domains are:

Experiments

The CDS-CORDEX subset consists of the following CORDEX experiments partly derived from the CMIP5 ones:

• evaluation: model simulations for the past with imposed "perfect" lateral boundary condition following ERA-Interim reanalyses (1979-2015).

• historical: model simulations for the past using lateral boundary conditions from Global Climate Models (GCMs). These experiments cover a period for which modern climate observations exist. These experiments show how the RCMs perform for the past climate when forced by GCMs and can be used as a reference period for comparison with scenario runs for the future.

• scenario experiments RCP2.6, RCP4.5, RCP8.5: ensemble of CORDEX climate projection experiments driven by boundary conditions from GCMs using RCP (Representative Concentration Pathways) forcing scenarios. The scenarios used here are RCP 2.6, 4.5 and 8.5, they provide different pathways of the future climate forcing.
  

Driving Global Climate Models and Regional Climate Models

Regional Climate Model (RCM) simulations needs lateral boundary conditions from Global Climate Models (GCMs). At the moment the CDS-CORDEX subset boundary conditions are extracted from CMIP5 global projections.

The C3S EURO-CORDEX subset aims to fill the gaps in this matrix between GCMs (aka "driving models), RCMs and RCPs. This will ensure better representation of uncertainties coming from GCMs, RCMs and RCP scenarios and make possible to study the regional climate change signals in a more comprehensive fashion. 

The driving GCM and RCM models included in the CDS-CORDEX subsets for the different domains available are detailed in the tables below. Note that the ensembles for different domains are formed by different GCM and RCM combinations from the main CMIP5 and CORDEX archives, respectively: these include 8 GCMs and 13 RCMs for EURO-CORDEX, 8 GCMs and 5 RCMs for Med-CORDEX, 8 GCMs and 8 RCMs for North-America CORDEX, and 5 GCMs and 6 RCMs for the Arctic. Please note that a small number of models were not included as those data have a research-only restriction on their use, while the data presented in the CDS are released without any restriction. 

In the tables below, please see the GCM-RCM combinations for each published domains.

AFR-CORDEX:

ANT-CORDEX:

ARC-CORDEX:

AUS-CORDEX:

CAM-CORDEX:

CAS-CORDEX:

EAS-CORDEX:

EURO-CORDEX:

Med-CORDEX:

MENA-CORDEX:

NAM-CORDEX:

SAM-CORDEX:

WAS-CORDEX:

SEA-CORDEX:

The 13 Regional Climate Models that ran simulations over the European domain will be documented through the Earth-System Documentation (ES-DOC) which provides a standardised and easy way to document climate models.

Ensembles

The boundary conditions used to run a RCM are also identified by the model member if the CMIP5 simulation used. Each modelling centre typically run the same experiment using the same GCM several times to confirm the robustness of results and inform sensitivity studies through the generation of statistical information. A model and its collection of runs is referred to as an ensemble. Within these ensembles, three different categories of sensitivity studies are done, and the resulting individual model runs are labelled by three integers indexing the experiments in each category. 

• The first category, labelled “realization”, performs experiments which differ only in random perturbations of the initial conditions of the experiment. Comparing different realizations allow estimation of the internal variability of the model climate. 
• The second category refers to variation in initialization parameters. Comparing differently initialized output provides an estimate of how sensitive the model is to initial conditions. 
• The third category, labelled “physics”, refers to variations in the way in which sub-grid scale processes are represented. Comparing different simulations in this category provides an estimate of the structural uncertainty associated with choices in the model design. 

Each member of an ensemble is identified by a triad of integers associated with the letters r, i and p which index the “realization”, “initialization” and “physics” variations respectively. For instance, the member "r1i1p1" and the member "r1i1p2" for the same model and experiment indicate that the corresponding simulations differ since the physical parameters of the model for the second member were changed relative to the first member. 

It is very important to distinguish between variations in experiment specifications, which are globally coordinated across all the models contributing to CMIP5, and the variations which are adopted by each modelling team to assess the robustness of their own results. The “p” index refers to the latter, with the result that values have different meanings for different models, but in all cases these variations must be within the constraints imposed by the specifications of the experiment. 

For the scenario experiments, the ensemble member identifier is preserved from the historical experiment providing the initial conditions, so RCP 4.5 ensemble member “r1i1p2” is a continuation of historical ensemble member “r1i1p2”.

For CORDEX data, the ensemble member is equivalent to the ensemble member of the CMIP5 simulation used to extract boundary conditions.

List of published parameters 

The table below lists the variables provided (the bold face items are available for all domains, the rest is only for Europe) at 3-hourly, 6-hourly, daily, monthly and seasonal temporal scale (for non-European domains only daily data are available). Note that orography and land area fraction variables are time independent model fields.

Note: on the data update of the 27th of May, 2021 for some non-European simulations only the six most demanded variables are published, which are 2m specific humidity, mean precipitation flux, 10m wind speed, 2m temperature, minimum and maximum temperature in the last 24 hours. The additional variables (indicated in bold face below) will be added in the next batch (anticipated latest in September, 2021).

Data Format

The CDS subset of CORDEX data are provided as NetCDF files. NetCDF (Network Common Data Form) is a file format that is freely available and commonly used in the climate modelling community. See the more details: What are NetCDF files and how can I read them

A CORDEX NetCDF file in the CDS contains: 

• Global metadata: these fields can describe many different aspects of the file such as
• when the file was created,
• the name of the institution and model used to generate the file
• links to peer-reviewed papers and technical documentation describing the climate model,
• the persistent identifier used to track the file annotations,
  
• links to supporting documentation on the climate model used to generate the file,
  
• software used in post-processing. 
• variable dimensions: such as time, latitude, longitude and height
• variable data: the gridded data
• variable metadata: e.g. the variable units, averaging period (if relevant) and additional descriptive data

The metadata provided in NetCDF files adhere to the Climate and Forecast (CF) conventions. The rules within the CF-conventions ensure consistency across data files, for example ensuring that the naming of variables is consistent and that the use of variable units is consistent.

File naming conventions

When you download a CORDEX file from the CDS it will have a naming convention that is as follows:

<variable>_<domain>_<driving-model>_<experiment>_<ensemble_member>_<rcm-model>_<rcm-run>_<time-frequency>_<temporal-range>.nc

Where

• <variable> is a short variable name, e.g. “tas” for ”temperature at the surface”
• <driving-model> is the name of the model that produced the boundary conditions
• <experiment> is the name of the experiment used to extract the boundary conditions
• <ensemble-member> is the ensemble identifier in the form “r<X>i<Y>p<Z>”, X, Y and Z are integers
• <rcm-model> is the name of the model that produced the data
• <rcm-run> is the version run of the model in the form of "vX" where X is integer
• <time-frequency> is the time series frequency (e.g., monthly, daily, seasonal) 
• the <temporal-range> is in the form YYYYMM[DDHH]-YYYY[MMDDHH], where Y is year, M is the month, D is day and H is hour. Note that day and hour are optional (indicated by the square brackets) and are only used if needed by the frequency of the data. For example daily data from the 1st of January 1980 to the 31st of December 2010 would be written 19800101-20101231.

Quality control of the CDS-CORDEX subset 

The CDS subset of the CORDEX data have been through a set of quality control checks before being made available through the CDS. The objective of the quality control process is to ensure that all files in the CDS meet a minimum standard. Data files were required to pass all stages of the quality control process before being made available through the CDS. Data files that fail the quality control process are excluded from the CDS-CORDEX subset or if possible the error is corrected and a note made in the history attribute of the file. The quality control of the CDS-CORDEX subset checks for metadata errors or inconsistencies against the Climate and Forecast (CF) Conventions and a set of CORDEX specific file naming and file global metadata conventions.

Various software tools have been used to check the metadata:

• The Quality Assurance compliance checking tool from DKRZ is used to check that: 
• the file name adheres to the CORDEX file naming convention, 
• the global attributes of the NetCDF file are consistent with filename,
• there are no omissions of required CORDEX metadata.
• The CF-Checker Climate and Forecast (CF) conventions checker (included in the QA-DKRZ) ensures that any metadata that is provided is consistent with the CF conventions. 

The figure below shows a scheme that classifies the tests performed by the QA-DKRZ tool in twelve categories (in green) showing the specific tests/checks in each case.

• When possible (i.e., optional),  the Time Axis checker developed by the IPSL is used to check the temporal dimension of the data:
• for individual files the time dimension of the data is checked to ensure it is valid and is consistent with the temporal information in the filename, 
• where more than one file is required to generate a time-series of data, the files have been checked to ensure there are no temporal gaps or overlaps between the files.

The data within the files were not individually checked, therefore it is important to note that passing of these quality control tests should not be confused with validity: for example, it will be possible for a file to be fully CF compliant and have fully compliant metadata but contain gross errors in the data that have not been revealed.

Known issues

All known issues about CORDEX data are documented through the ES-DOC Errata Service : https://errata.es-doc.org/. The Errata Service also includes a command-line interface and an API to request the issue database for a specific dataset or file.

In addition:

• Please have a look on the Errata Service to be warned about deprecated CORDEX runs that will be retracted in the future.
• Please not that not all combinations of models and domains exists. This feature is due to the different CORDEX initiatives/consortiums that do not involved the same data producers using the same RCMs.
• Please note that not all the combinations of models and variables exist. This feature is inherited from the ESGF system, where the main target is to publish as much as possible data and even publish incomplete datasets, which might be of use. This allows to have more data available with the price that not everything is fully complete. 

EURO-CORDEX background documents and user guides

There is a very useful User Guide prepared by the EURO-CORDEX community which is providing guidance how to use EURO-CORDEX climate projection data. Please note that the data download part of this document at this stage refers only to access the data from the ESGF directly. Certainly the data can be also downloaded from the CDS and this information will be soon provided in that document. This EURO-CORDEX User Guide is available at https://www.euro-cordex.net/imperia/md/content/csc/cordex/guidance_for_euro-cordex_climate_projections_data_use__2021-02_1_.pdf

The spatial overlaps of the different CORDEX domains provides an opportunity for building grand ensembles by pulling together all the existing simulations from the different domains. Although this could in principle create some heterogeneity and/or duplication, there are recent studies that use and support this option (https://doi.org/10.1175/JCLI-D-19-0084.1), although further research is still needed to assess the resulting grand ensembles (see for instance https://doi.org/10.1029/2019GL086799).

The documents below were provided by the data supplier as background information on the creation of the EURO-CORDEX data stored in the Climate Data Store (CDS) for the benefit of the CORDEX data users.

• Experimental design for the GCM/RCM Matrix (29/06/2018)

This report documents how the new EURO-CORDEX experiment is designed in terms of which GCM-RCM-RCP combinations to run in the project. This was produced quite some time ago, therefore the presented information is not fully up-to-date, but nevertheless provides a fairly good idea about the concept for designing new experiments. 

• Documentation for the use of pattern scaling with particular focus on Europe (25/04/2019)

This report documents results from the 34 EURO-CORDEX RCP8.5 simulations. For a number of European subregions we present patterns describing the regional climate change in relation to the change in global mean temperature. These patterns are derived as the linear fit between regional climate change and change in global mean temperature. This is a commonly used method and can be seen as the standard definition of pattern scaling used in the scientific literature. For the calculation of these patterns the climate change signal was derived for three different time windows (2011-2040, 2041-2070 and 2071-2100) w.r.t. the control climate (1971-2000)

• Decide on experimental setup for internal variability (28/02/2018)

Internal variability is an intrinsic character of the climate system and it is also present in climate models. The design to run new RCM experiments took into account the intention that the internal variability can be studied. This report present some early investigations on these aspects for the EURO-CORDEX domain. 

• Synthesis report (28/02/2020)

In this report we review the state of the EURO-CORDEX ensemble as valid at the beginning of 2020. The report indicates climate change findings what can be deduced with the help of the larger RCM ensemble available. Regular updates of such reports are planned and the document will be updated here.

• Proposed method to assess the usability of the RCP-GCM-RCM modelling setup and description of the first results

C3S is aiming to build a EURO-CORDEX ensemble which is as complete as possible. By doing this, C3S will fill some of the missing elements of the EURO-CORDEX GCM-RCM-RCP uncertainty matrix. As we will have more simulations available (and these being complete sub-matrices, for instance), we are in a better position to assess how the full matrix can be reproduced when based on fewer available model simulations. In addition, we can determine how the missing model elements can be built. This unique study gives valuable insights into the optimal design of such ensemble systems in the future.

References

AFR-CORDEX:

• Nikulin G, Lennard C, Dosio A, et al. (2018) The effects of 1.5 and 2 degrees of global warming on Africa in the CORDEX ensemble, Environ. Res. Lett., doi:10.1088/1748-9326/aab2b4, http://iopscience.iop.org/article/10.1088/1748-9326/aab1b1
• Nikulin G., Jones, C. , Giorgi, F., et al. (2013)  Precipitation Climatology in An Ensemble of CORDEX-Africa Regional Climate Simulations,  J. Climate, 25, 6057–6078. http://doi.org/10.1175/JCLI-D-11-00375.1

ANT-CORDEX:

• Kittel, C., Amory, C., Agosta, C., et al. (2021): Diverging future surface mass balance between the Antarctic ice shelves and grounded ice sheet, The Cryosphere, 15, 1215–1236, https://doi.org/10.5194/tc-15-1215-2021.
• Lenaerts, J. T. M., van den Broeke, M. R., van de Berg, W. J., van Meijgaard, E., and Kuipers Munneke, P. (2012), A new, high-resolution surface mass balance map of Antarctica (1979–2010) based on regional atmospheric climate modeling, Geophys. Res. Lett., 39, L04501, https://www.doi.org/10.1029/2011GL050713
• Mottram, R., Hansen, N., Kittel, C., et al. (2020) What is the Surface Mass Balance of Antarctica? An Intercomparison of Regional Climate Model Estimates, The Cryosphere Discuss. [preprint], https://doi.org/10.5194/tc-2019-333

ARC-CORDEX:

• Inoue, J., Sato, K., Rinke, A., et al. (2021) Clouds and radiation processes in regional climate models evaluated using observations over the ice‐free Arctic Ocean, J. Geophys. Res. Atm., 126, e2020JD033904, http://doi.org/10.1029/2020JD033904

• Sedlar, J., M. Tjernström, A. Rinke, et al. (2020) Confronting Arctic troposphere, clouds and surface energy budget representations in regional climate models with observations, J. Geophys. Res. Atm., 124, http://doi.org/10.1029/2019JD031783

• Akperov, M., A. Rinke, I.I. Mokhov, et al. (2019) Future projections of cyclone activity in the Arctic for the 21st century from regional climate models (Arctic-CORDEX), Glob. Planet. Change, http://doi.org/10.1016/j.gloplacha.2019.103005

• Diaconescu, E.P., Mailhot, A., Brown, R. et al. (2018) Evaluation of CORDEX-Arctic daily precipitation and temperature-based climate indices over Canadian Arctic land areas, Clim. Dyn., 50, 2061–2085, doi:doi.org/10.1007/s00382-017-3736-4

AUS-CORDEX:

• Di Virgilio, G., Evans, J.P., Di Luca, A. et al. (2019) Evaluating reanalysis-driven CORDEX regional climate models over Australia: model performance and errors. Clim Dyn 53, 2985–3005. https://doi.org/10.1007/s00382-019-04672-w
• Evans, J.P., Di Virgilio, G., Hirsch, A.L. et al. (2020) The CORDEX-Australasia ensemble: evaluation and future projections. Clim Dyn. https://doi.org/10.1007/s00382-020-05459-0
• Di Virgilio, G., Evans, J.P., Di Luca, A. et al. (2020) Realised added value in dynamical downscaling of Australian climate change. Clim Dyn 54, 4675–4692. https://doi.org/10.1007/s00382-020-05250-1

CAM-CORDEX:

• Cavazos, T, Luna-Niño, R, Cerezo-Mota, R, et al. (2020) Climatic trends and regional climate models intercomparison over the CORDEX-CAM (Central America, Caribbean, and Mexico) domain. Int J Climatol.; 40: 1396– 1420. https://doi.org/10.1002/joc.6276
• Luna-Niño, R., Cavazos, T., Torres-Alavez, J.A. et al. (2020) Interannual variability of the boreal winter subtropical jet stream and teleconnections over the CORDEX-CAM domain during 1980–2010. Clim Dyn. https://doi.org/10.1007/s00382-020-05509-7

CAS-CORDEX:

• Top, S., Kotova, L., De Cruz, L., et al. (2021) Evaluation of regional climate models ALARO-0 and REMO2015 at 0.22° resolution over the CORDEX Central Asia domain, Geosci. Model Dev., 14, 1267–1293, https://doi.org/10.5194/gmd-14-1267-2021
• Ozturk, T., Turp, M. T., Türkeş, M., & Kurnaz, M. L. (2017). Projected changes in temperature and precipitation climatology of Central Asia CORDEX Region 8 by using RegCM4.3.5. Atmospheric Research, 183, 296–307. https://doi.org/10.1016/j.atmosres.2016.09.008

EAS-CORDEX:

• Sun, H., Wang, A. et al (2018) Impacts of global warming of 1.5°C and 2.0°C on precipitation patterns in China by regional climate model (COSMO-CLM). Atmos Res 203:83–94. https://doi.org/10.1016/j.atmosres.2017.10.024
• Teichmann, C., Jacob, D., Remedio, A.R. et al. (2020) Assessing mean climate change signals in the global CORDEX-CORE ensemble. Clim Dyn. https://doi.org/10.1007/s00382-020-05494-x

EURO-CORDEX:

• Kotlarski, S., Keuler, K., Christensen, O. B., et al. (2014) Regional climate modeling on European scales: a joint standard evaluation of the EURO-CORDEX RCM ensemble, Geosci. Model Dev., 7, 1297–1333, https://doi.org/10.5194/gmd-7-1297-2014
• Jacob, D., Teichmann, C., Sobolowski, S. et al. (2020) Regional climate downscaling over Europe: perspectives from the EURO-CORDEX community. Reg Environ Change 20, 51. https://doi.org/10.1007/s10113-020-01606-9
• Christensen, O.B., Kjellström, E. Partitioning uncertainty components of mean climate and climate change in a large ensemble of European regional climate model projections. Clim Dyn (2020). https://doi.org/10.1007/s00382-020-05229-y 
• Sørland SL, Schär C, Lüthi D, Kjellström E (2018) Bias patterns and climate change signals in GCM-RCM model chains. Environ Res Lett 13(7):074017. https://doi.org/10.1088/1748-9326/aacc77

• Coppola E., Nogherotto R., Ciarlò J.M. et al. (2021) Assessment of the European climate projections as simulated by the large EURO-CORDEX regional and global climate model ensemble. Journal of Geophysical Research – Atmospheres, https://doi.org/10.1029/2019JD032356

• Vautard R., Kadygrov N., Iles C. et al. (2021) Evaluation of the large EURO-CORDEX regional climate model ensemble. Journal of Geophysical Research – Atmospheres, https://doi.org/10.1029/2019JD032344

MED-CORDEX:

• Ruti PM, Somot S, Giorgi F, et al. (2016) MED-CORDEX initiative for Mediterranean Climate studies. Bull. Amer. Meteor. Soc., 97(7), 1187-1208, July 2016, doi: http://dx.doi.org/10.1175/BAMS-D-14-00176.1, http://journals.ametsoc.org/doi/abs/10.1175/BAMS-D-14-00176.1

• Somot S., Ruti P., Ahrens B. et al. (2018). Editorial for the Med-CORDEX Special Issue. Clim. Dyn. 51(3):771-777, doi: 10.1007/s00382-018-4325-x, https://link.springer.com/article/10.1007/s00382-018-4325-x
• Med-CORDEX Special Issue, Climate Dynamics, volume 51, issue 3, 2018; https://link.springer.com/journal/382/volumes-and-issues/51-3

MENA-CORDEX:

• Zittis, G., Hadjinicolaou, P. and Lelieveld, J. (2014) Comparison of WRF Model Physics Parameterizations over the MENA-CORDEX Domain. American Journal of Climate Change, 3, 490-511. http://doi.org/10.4236/ajcc.2014.35042
• Almazroui, M. (2016) RegCM4 in climate simulation over CORDEX-MENA/Arab domain: selection of suitable domain, convection and land-surface schemes. Int. J. Climatol., 36: 236-251. https://doi.org/10.1002/joc.4340
• Bucchignani, E., Mercogliano, P., Rianna, G. and Panitz, H.-J. (2016) Analysis of ERA-Interim- driven COSMO-CLM simulations over Middle East – North Africa domain at different spatial resolutions. Int. J. Climatol., 36: 3346–3369. http://doi.org/10.1002/joc.4559 

NAM-CORDEX:

• Bukovsky, M. S., and Mearns, L. O. (2020). Regional climate change projections from NA-CORDEX and their relation to climate sensitivity. Clim. Change 162, 645–665. https://link.springer.com/article/10.1007%2Fs10584-020-02835-x

SAM-CORDEX: 

• Blázquez, J., Silvina, A.S. Multiscale precipitation variability and extremes over South America: analysis of future changes from a set of CORDEX regional climate model simulations. Clim Dyn 55, 2089–2106 (2020). https://doi.org/10.1007/s00382-020-05370-8
• Llopart, M., Simões Reboita, M. & Porfírio da Rocha, R. Assessment of multi-model climate projections of water resources over South America CORDEX domain. Clim Dyn 54, 99–116 (2020). https://doi.org/10.1007/s00382-019-04990-z
• Solman, S.A., Blázquez, J. Multiscale precipitation variability over South America: Analysis of the added value of CORDEX RCM simulations. Clim Dyn 53, 1547–1565 (2019). https://doi.org/10.1007/s00382-019-04689-1
• Falco, M., Carril, A.F., Menéndez, C.G. et al. Assessment of CORDEX simulations over South America: added value on seasonal climatology and resolution considerations. Clim Dyn 52, 4771–4786 (2019). https://doi.org/10.1007/s00382-018-4412-z

WAS-CORDEX:

• Sanjay J, Krishnan R, Shrestha AB, Rajbhandari R, Ren G-Y (2017) Downscaled climate change projections for the Hindu Kush Himalayan region using CORDEX South Asia regional climate models. Adv Clim Chang Res 8(3):185–198, https://doi.org/10.1016/j.accre.2017.08.003

SEA-CORDEX:

• Tangang, F., Chung, J.X., Juneng, L. et al. (2020) Projected future changes in rainfall in Southeast Asia based on CORDEX–SEA multi-model simulations. Clim Dyn 55, 1247–1267. https://doi.org/10.1007/s00382-020-05322-2

CORDEX-CORE (comprehensive and homogeneous projections across almost all CORDEX domains with 0.22º resolution):

• Teichmann, C., Jacob, D., Remedio, A.R. et al. (2020) Assessing mean climate change signals in the global CORDEX-CORE ensemble. Clim Dyn. https://doi.org/10.1007/s00382-020-05494-x
• Coppola, E., Raffaele, F., Giorgi, F. et al. (2021) Climate hazard indices projections based on CORDEX-CORE, CMIP5 and CMIP6 ensemble. Clim Dyn. https://doi.org/10.1007/s00382-021-05640-z

Related articles

• Page:
  CORDEX: Regional climate projections
• Page:
  CMIP6: Global climate projections
• Page:
  CMIP6: Decadal climate predictions
• Page:
  CMIP: Global climate projections
• Page:
  C3S Climate projections